Numerical model of the steady-state condenser and effect of pressure drop correlations on refrigerant physical parameters
DOI:
https://doi.org/10.24237/2026.19101Keywords:
Single-phase region, Two-phase region, Refrigerant/air condenser, Numerical simulation, Pressure drop, Steady-stateAbstract
Air-cooled condensers are an important part of modern refrigeration systems because they affect how well the system works and how much energy it uses. This study develops an integrated numerical model to simulate the behaviour of an air-cooled condenser using Fortran and RefProp 8.0 to evaluate the thermophysical properties of R22 and R32 refrigerants. The model solves five equations at the same time. These include the Navier-Stokes equations for the main refrigerant's mass, momentum, and energy conservation, the energy balance equation for the condenser wall, and the enthalpy equation for the secondary fluid (air). Due to the nonlinear nature of the system, the full implicit Preismann scheme was applied in conjunction with the Newton-Raphson and bisection methods to improve numerical stability and accelerate convergence. The results demonstrate that the developed model precisely forecasts the steady-state performance of the condenser, offering thorough analyses of the pressure drop and heat transfer coefficients in both the single-phase and two-phase flow regions. The effective condenser length was found to be 20 meters for R22 refrigerant and 48 meters for R32, with the two-phase zone dominating by 96%, indicating that condensation occurs primarily within this section. Furthermore, the refrigerant behaves as an incompressible fluid in the partially cooled liquid zone. Comparison with EVAP-COND 4.0 and previous studies revealed a deviation of less than ±1% in the performance parameters. These results demonstrate the long-term promise of the developed model as an effective tool for designing and optimizing air-cooled condensers for industrial refrigeration and air conditioning applications.
Downloads
References
[1] A. Roccato, M. Uyttendaele, and J.-M. Membré, "Analysis of domestic refrigerator temperatures and home storage time distributions for shelf-life studies and food safety risk assessment," Food Research International, vol. 96, pp. 171-181, 2017.
doi: 10.1016/j.foodres.2017.02.017
[2] P. D. Gaspar and P. D. da Silva, "Handbook of research on advances and applications in refrigeration systems and technologies," 2015.
[3] R. Hatchett, "The medicines refrigerator and the importance of the cold chain in the safe storage of medicines," Nursing Standard (2014+), vol. 32, p. 53, 2017.
doi: 10.7748/ns.2017.e10960
[4] F. van Holsteijn and R. Kemna, "Minimizing food waste by improving storage conditions in household refrigeration," Resources, Conservation and Recycling, vol. 128, pp. 25-31, 2018.
doi: 10.1016/j.resconrec.2017.09.012
[5] K. J. Chua, S. K. Chou, W. Yang, and J. Yan, "Achieving better energy-efficient air conditioning–a review of technologies and strategies," Applied energy, vol. 104, pp. 87-104, 2013.
doi: 10.1016/j.apenergy.2012.10.037H.
[6] J.-S. Oh, M. Binns, S. Park, and J.-K. Kim, "Improving the energy efficiency of industrial refrigeration systems," Energy, vol. 112, pp. 826-835, 2016.
doi: 10.1016/j.energy.2016.06.119
[7] H. Ramadan and A. Cappenberg, "Uji Prestasi Refrigeran R22 Pada Mesin Pendingin Kompresi Uap Dengan Metode Pengujian Aktual Dan Simulasi," Jurnal Konversi Energi dan Manufaktur, pp. 74-81, 2018. https://doi.org/10.21009/jkem.5.2.3
[8] Y.-Y. Yan and T.-F. Lin, "Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe," International Journal of Heat and Mass Transfer, vol. 42, pp. 697-708, 1999.
https://doi.org/10.1016/s0017-9310(98)00195-1
[9] N. Liu and J. Li, “Experimental study on condensation heat transfer of R32, R152a and R22 in horizontal minichannels,” Applied Thermal Engineering, vol. 90, pp. 763–773, 2015. https://doi.org/10.1016/j.applthermaleng.2015.07.062
[10] S.-M. Kim and I. Mudawar, "Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows," International Journal of Heat and Mass Transfer, vol. 55, pp. 3246-3261, 2012.
https://doi.org/10.1016/j.ijheatmasstransfer.2012.02.047
[11] S.-M. Kim and I. Mudawar, "Review of databases and predictive methods for heat transfer in condensing and boiling mini/micro-channel flows," International Journal of Heat and Mass Transfer, vol. 77, pp. 627-652, 2014.
https://doi.org/10.1016/j.ijheatmasstransfer.2014.05.036
[12] D. Del Col, M. Bortolato, and S. Bortolin, "Comprehensive experimental investigation of two-phase heat transfer and pressure drop with propane in a minichannel," International Journal of Refrigeration, vol. 47, pp. 66-84, 2014. https://doi.org/10.1016/j.ijrefrig.2014.08.002
[13] F. C. McQuiston, J. D. Parker, J. D. Spitler, and H. Taherian, Heating, ventilating, and air conditioning: analysis and design: John Wiley & Sons, 2023.
[14] R. Eldeeb, V. Aute, and R. Radermacher, "A survey of correlations for heat transfer and pressure drop for evaporation and condensation in plate heat exchangers," International Journal of Refrigeration, vol. 65, pp. 12-26, 2016.
https://doi.org/10.1016/j.ijrefrig.2015.11.013
[15] X. Tao and C. A. I. Ferreira, "Heat transfer and frictional pressure drop during condensation in plate heat exchangers: Assessment of correlations and a new method," International Journal of Heat and Mass Transfer, vol. 135, pp. 996-1012, 2019.
https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.132
[16] S. Marzouk, M. Abou Al-Sood, E. M. El-Said, M. K. El-Fakharany, and M. Younes, "Study of heat transfer and pressure drop for novel configurations of helical tube heat exchanger: a numerical and experimental approach: SA Marzouk et al," Journal of Thermal Analysis and Calorimetry, vol. 148, pp. 6267-6282, 2023.
doi: 10.1007/s10973-023-12067-7
[17] F. Wang, G. Maidment, J. Missenden, and R. Tozer, "A novel special distributed method for dynamic refrigeration system simulation," International Journal of Refrigeration, vol. 30, pp. 887-903, 2007.
https://doi.org/10.1016/j.ijrefrig.2006.10.010
[18] I. Fayssal and F. Moukalled, "A New Numerical Approach for Predicting the Two-Phase Flow of Refrigerants during Evaporation and Condensation," Numerical Heat Transfer, Part B: Fundamentals, vol. 62, pp. 341-369, 2012. https://doi.org/10.1080/10407790.2012.707009
[19] L. Zhang, J. Liu, and X. Xu, "Numerical simulation of heat transfer performance of R410A in condensing-superheated zone," International Journal of Refrigeration, vol. 128, pp. 206-217, 2021.
https://doi.org/10.1016/j.ijrefrig.2021.03.019
[20] X. Jia, "A distributed model for prediction of the transient response of an evaporator," in Fuel and Energy Abstracts, 1996, p. 48.
https://doi.org/10.1016/0140-7007(95)00015-4G
[21] S. Li and Y. Ju, "Numerical study on the condensation characteristics of various refrigerants outside a horizontal plain tube at low temperatures," International Journal of Thermal Sciences, vol. 176, p. 107508, 2022.
doi: 10.1016/j.ijthermalsci.2022.107508
[22] M. Moradkhani, S. Hosseini, M. Song, and A. Abbaszadeh, "Reliable smart models for estimating frictional pressure drop in two-phase condensation through smooth channels of varying sizes," Scientific Reports, vol. 14, p. 10515, 2024.
https://doi.org/10.1038/s41598-024-60898-7
[23] Y. Sun, H. Wang, F. Nie, M. Gong, and J. Shen, "Investigations on the heat transfer enhancement of converging minitubes for methane condensation," International Journal of Refrigeration, vol. 160, pp. 357-372, 2024.
https://doi.org/10.1016/j.ijrefrig.2024.01.015
[24] O. A. Marzouk, "Condenser pressure influence on ideal steam rankine power vapor cycle using the python extension package cantera for thermodynamics," arXiv preprint arXiv:2503.00180, 2025.
doi: 10.48550/arXiv.2503.00180
[25] Y. Jiang, Y. Feng, S. Tian, Z. Liu, X. Wang, Y. Wu, and Y. Zhang, "Experimental and numerical optimization of a scroll expander for small-scale ORC systems using pure and mixture working fluids," Energy, p. 137333, 2025.doi: 10.1016/j.energy.2025.137333.
[26] H. Wang and S. Touber, "Distributed and non-steady-state modelling of an air cooler," International Journal of Refrigeration, vol. 14, pp. 98-111, 1991.
https://doi.org/10.1016/0140-7007(91)90082-r
[27] D. Ndiaye and M. Bernier, "Transient modeling of refrigerant-to-airfin-and-tube heat exchangers," HVAC&R Research, vol. 16, pp. 355-381, 2010. https://doi.org/10.1080/10789669.2010.10390909
[28] I. Toumi, "An upwind numerical method for two-fluid two-phase flow models," Nuclear Science and Engineering, vol. 123, pp. 147-168, 1996.
https://doi.org/10.13182/nse96-a24180
[29] E. M. Smith, Advances in thermal design of heat exchangers: Wiley, 2005.
[30] M. R. Conde, A contribution to heat pump design by simulation: Verlag nicht ermittelbar, 1992.
[31] X. Jia, "A distributed model for prediction of the transient response of an evaporator," in Fuel and Energy Abstracts, 1996, p. 48.
https://doi.org/10.1016/0140-7007(95)00015-4
[32] X. Jia, C. Tso, P. Jolly, and Y. Wong, "Distributed steady and dynamic modelling of dry-expansion evaporators: Modèlisation du régime stable et du régime transitoire des évaporateurs à détente sèche," International Journal of Refrigeration, vol. 22, pp. 126-136, 1999.
https://doi.org/10.1016/s0140-7007(98)00043-7
[33] L. Yang and C.-L. Zhang, "Two-fluid model of refrigerant two-phase flow through short tube orifice," International Journal of Refrigeration, vol. 28, pp. 419-427, 2005.
doi: 10.1016/j.ijrefrig.2004.06.007
[34] G. B. Wallis, One-Dimensional Two-Phase Flow., New York: McGraw-Hill, 1969.
[35] Y. Yao, Y. Jiang, S. Deng, and Z. Ma, "A study on the performance of the airside heat exchanger under frosting in an air source heat pump water heater/chiller unit," International Journal of Heat and Mass Transfer, vol. 47, pp. 3745-3756, 2004. https://doi.org/10.1016/j.ijheatmasstransfer.2004.03.001
[36] J. Nyers and G. Stoyan, "A dynamical model adequate for controlling the evaporator of a heat pump," International Journal of Refrigeration, vol. 17, pp. 101-108, 1994.
https://doi.org/10.1016/0140-7007(94)90050-7
[37] R. A. Berry, J. W. Peterson, H. Zhang, R. C. Martineau, H. Zhao, L. Zou, D. Andrs, and J. Hansel, "RELAP-7 theory manual," Idaho National Laboratory (INL), Idaho Falls, ID (United States)2018.
[38] G. Rigot, Transmission et échangeurs de chaleur: Les Editions parisiennes, 1991.
[39] V. D. Ingenieure and V.-G. V. u. Chemieingenieurwesen, "Einführung in die Lehre von der Wärmeübertragung," in VDI-Wärmeatlas: Berechnungsblätter für den Wärmeübergang, ed: Springer, 1997, pp. 1-56.
https://doi.org/10.1007/978-3-662-10745-4_1.
[40] P.-Q. Vu, K.-I. Choi, J.-T. Oh, and H. Cho, "Condensation heat transfer of R22, R410A and R32 inside a multiport mini-channel tube," 2018.
[41] W. Chen and X. Fang, "A note on the Chen correlation of saturated flow boiling heat transfer," International Journal of Refrigeration, vol. 48, pp. 100-104, 2014.
https://doi.org/10.1016/j.ijrefrig.2014.09.008
[42] D. Chen and S. Lin, "Underpressure of vaporization of refrigerant R-134a through a diabatic capillary tube," International Journal of Refrigeration, vol. 24, pp. 261-271, 2001.
https://doi.org/10.1016/s0140-7007(00)00019-0
[43] A. H. Fundamentals, "American society of heating," Refrigerating and Air-Conditioning Engineers, 2005.
[44] J. R. Thome, "Wolverine engineering databook III," 2006.
[45] J. C. Chen, "Correlation for boiling heat transfer to saturated fluids in convective flow," Industrial & engineering chemistry process design and development, vol. 5, pp. 322-329, 1966. https://doi.org/10.1021/i260019a023
[46] D. C. Rennels, Pipe flow: A practical and comprehensive guide: John Wiley & Sons, 2022.
[47] “Relative Roughness of Pipe,” Nuclear-Power.com, Jun. 22, 2025. [Online]. Available: [https://www.nuclear-power.com/nuclear-engineering/fluid-dynamics/major-head-loss-friction-loss/relative-roughness-of-pipe/].
[48] N.-H. Kim, J.-H. Yun, and R. Webb, "Heat transfer and friction correlations for wavy plate fin-and-tube heat exchangers," 1997.
https://doi.org/10.1115/1.2824141
[49] J. S. Van Der Meer, "Simulation of a refrigerant evaporator," 1989.
[50] M. O. Didi, N. Kattan, and J. Thome, "Prediction of two-phase pressure gradients of refrigerants in horizontal tubes," International Journal of Refrigeration, vol. 25, pp. 935-947, 2002.
https://doi.org/10.1016/s0140-7007(01)00099-8
[51] S. M. Ghiaasiaan, Two-phase flow, boiling, and condensation: in conventional and miniature systems: Cambridge University Press, 2017.
https://doi.org/10.1017/9781316597392
[52] J. R. Thome and A. Cioncolini, "Flow boiling in microchannels," in Advances in Heat Transfer. vol. 49, ed: Elsevier, 2017, pp. 157-224. https://doi.org/10.1016/bs.aiht.2017.06.001
[53] J. R. Thome and A. Cioncolini, "Two-phase pressure drop," in ENCYCLOPEDIA OF TWO-PHASE HEAT TRANSFER AND FLOW I: FUNDAMENTALS AND METHODS, ed: World Scientific, 2016, pp. 143-176.
https://doi.org/10.1142/9789814623216_0023
[54] R. Radermacher and Y. Hwang, Vapor compression heat pumps with refrigerant mixtures: CRC press, 2005. https://doi.org/10.1201/9781420037579
[55] X. Boissieux, M. Heikal, and R. Johns, "Two-phase heat transfer coefficients of three HFC refrigerants inside a horizontal smooth tube, part I: evaporation," International Journal of Refrigeration, vol. 23, pp. 269-283, 2000. https://doi.org/10.1016/s0140-7007(99)00056-0
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ahmed Haidour, Boumediene Touati, Achour Mansouri, Hamou Soualmi
This work is licensed under a Creative Commons Attribution 4.0 International License.
